Autoglym Polar Blast 2.5L
- Description
Description
Polar Blast is a snow foam available in a 2.5 litre which can be applied using a pressure washer or foam gun as a pre-wash stage. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing.
This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Polar Blast can be used instead of a shampoo as long as the vehicle isn’t heavily soiled, just be sure to rinse the vehicle with water first to remove the top layer of dirt.
Its pH neutral formulation will not remove any existing layers of polish or wax.
- Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
- Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam.
- Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.
- Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on.
- Finally, rinse thoroughly from the bottom up.
<iframe width=”560″ height=”315″ src=”https://www.youtube.com/embed/0XaI2idyYFc” title=”YouTube video player” frameborder=”0″ allow=”accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture” allowfullscreen></iframe>
Related products
With the SONAX XTREME Spray+Seal Spray-on Sealant, a complete vehicle can be lastingly sealed, protected and rendered dirt repellent in just 5 minutes during the car wash! The colour depth of the paintwork surface is enhanced in the process and a mirror shine produced and an excellent water and dirt repellent effect is produced in […]
With the SONAX XTREME Spray & Seal Spray-on Sealant, a complete vehicle can be lastingly sealed, protected and rendered dirt repellent in just 5 minutes during the car wash! The colour depth of the paintwork surface is enhanced in the process and a mirror shine produced and an excellent water and dirt repellent effect is […]
Polar Wash is a safe and effective cleaner that should be applied using a pressure washer with a foam gun after pre-washing with a snow foam such as Polar Blast. This impressive cleaner will cover your vehicle in a blanket of foam that makes light work of dirt, traffic film and road grime removal. Before […]
Introducing the incredibly easy to use, effective, and revolutionary TRUE WIPE-LESS spray sealant! CarPro HydrO2is formulated with Hydrophilic glass fibers, silicon polymers, and fluoropolymers and can be applied to all vehicle surfaces! Paint, glass, plastic, convertible tops, wheels, calipers, and wheel wells are all easily within reach withHydrO2. HydrO2 was specifically formulated to save time […]
Wowo’s Hot Wax is an advanced blend of carnauba and montan wax, with advanced silicones and polymers which has been designed to allow it to be used in direct sunlight on surfaces up to 50oC. Instructions 1. Give the bottle a good shake and make sure the vehicle is clean and dry. 2. For best […]
WOWO’S CRYSTAL SEALANT SI Wowo’s CRYSTAL SEALANT is a Nano-Polymer based spray sealant for your Paintwork. The easy spray application means you don’t need to be a Professional Detailer to use it. The best part – it’s a cross-linking nano siloxane which creates a mesh across the paint surface that is extremely detergent resistant! That […]
Rapid Aqua Wax is the best kept secret in car care. Our carnauba based wax can be applied directly to a wet vehicle straight after washing, giving you a stunning hard wax finish in just a fraction of the time. It can be used to protect all exterior surfaces including paint, plastic, rubber and glass […]
SONAX Polymer Net Shield is the latest arsenal in performance car care, complimenting its counterparts in both the Top-Of-The-Line Graded ProfiLine products. Directions for use: Before sealing, the paint should be clean and dry. Simply apply the product directly to onto an application sponge or spray directly on the paint surface, spreading evenly. Treat only […]