Autoglym Intensive Tar Remover 325ml
- Description
Description
Autoglym Intensive Tar Remover 325ml
During warm weather the road surface can disintegrate and small specks of tar are flicked onto your car and can be difficult to remove with shampoo alone. These spots show up especially well on light coloured cars and can spoil the look of a clean car.
Intensive Tar Remover can be used on the exterior of your car to remove tar spots, adhesive residues, fuel stains and tree sap.
It can be used on the interior of your car to remove ink, chewing gum, glue residue and oil stains from seats, carpets and hard surfaces.
Pro Tip: Use to remove polish and wax residue from rubber and plastic trim.
Exterior use:
Apply directly to tar spots using a clean cotton cloth.
Tar spots will dissolve and begin to run. Allow 1-2 minutes contact time and wipe or wash off. Heavy deposits of wax, oil, fuel stains or adhesive residues may require gentle rubbing.
Interior use:
Pre-test fabric colour fastness on small inconspicuous area. Apply to a clean cotton cloth and work inwards on the stain.
Gently rub with a clean cloth to remove residue and leave treated surface to dry.
Clean fabric with Interior Shampoo to remove any residue.
Related products
Gtechniq W9 Water Spot Remover 500ml – Removes water and silica spots – Coating safe – Use on all paint types and vinyl Why use W9 Water Spot Remover? W9 Water Spot Remover is a concentrated formula which is 100% coating safe. Unlike standard single mechanism water spot removers, W9 has a three mechanism approach […]
CarPro’s Iron X Snow Soap Gel has under gone some major changes! It is now known as CarPro Snow Soap and can be used in with multiple wash methods including as a snow foam or as it was previously used adding directly to your mitt. After a vehicle has been properly de-contaminated IXSS will keep […]
Roar Deep Wash Clay Mitt is a superior clay mitt for the removal of contaminants in your paint work, It is ideal for restoring your gloss level and giving you a smooth finish. Effective on paint, glass and chrome surfaces Can restore high gloss and smooth finish It can be rinsed and reused numerous times Effectively […]
Immolube is a special mixture of surfactants and solvents made for reducing friction while sanding, polishing or claying painted automotive surfaces. Its slick, non-stick formula offers enough viscosity to reduce unwanted digging, and marring. Immolube has no protective polymers and no gloss enhancers in it and is easy to remove with a wash or wipe. […]
Mild, low-residue lubricant free of coating defcts. Effective for use with clay bars or pads. The excellent lubricity minimises surface scratching during cleaning. Unlike other lubricants it does not leave behind any film. Residue is easy to wipe away with a microfibre cloth. Due to the specialised formula the clay bars or pads do not […]
Wowo’s FALLOUT REMOVER is exactly what you need to remove the embedded particles and iron deposits in your paintwork. This is a necessary step in your car’s maintenance routine. Loaded with Surfactants, FALLOUT REMOVER dissolves iron and other particles causing a reaction that makes your car look as though its bleeding purple. But don’t worry! […]
Clay blue is a useful cleaning clay for removing harmful contamination from paint surfaces including paint overspray, industrial dust, surface rust, tree sap, tar, insect residue and other stubborn dirt deposits. Use in conjunction with SONAX screen cleaner as a lubricant for a smooth, non abrasive alternative to water. Removes harmful bonded contaminants Ideal for […]
For removing surface dirt contamination such as tree sap, rust bloom, insect residue and tar stains from paintwork and glass. Directions for use: – Wash the vehicle. Spray the surfaces to be treated with cleaning/lubricant spray (e.g. SONAX Clear Glass) until a homogeneous liquid fi lm is formed – Wipe affected surfaces with the Clay […]