Autoglym Intensive Tar Remover 325ml
- Description
Description
Autoglym Intensive Tar Remover 325ml
During warm weather the road surface can disintegrate and small specks of tar are flicked onto your car and can be difficult to remove with shampoo alone. These spots show up especially well on light coloured cars and can spoil the look of a clean car.
Intensive Tar Remover can be used on the exterior of your car to remove tar spots, adhesive residues, fuel stains and tree sap.
It can be used on the interior of your car to remove ink, chewing gum, glue residue and oil stains from seats, carpets and hard surfaces.
Pro Tip: Use to remove polish and wax residue from rubber and plastic trim.
Exterior use:
Apply directly to tar spots using a clean cotton cloth.
Tar spots will dissolve and begin to run. Allow 1-2 minutes contact time and wipe or wash off. Heavy deposits of wax, oil, fuel stains or adhesive residues may require gentle rubbing.
Interior use:
Pre-test fabric colour fastness on small inconspicuous area. Apply to a clean cotton cloth and work inwards on the stain.
Gently rub with a clean cloth to remove residue and leave treated surface to dry.
Clean fabric with Interior Shampoo to remove any residue.
Related products
A slightly more aggressive clay bar that will help you prepare your car paint before the application of any protective coatings, no matter whether sealant, or wax. It removes any dirt that might not be visible with a naked eye, like iron filings, rubber residue, bird and sap droppings. The body of the vehicle will […]
OPTIMUM FERREX 500ML SPRAY BOTTLE Our Optimum FerreX spray is designed to dissolve ferrous oxides from wheels and painted surfaces quickly, by bonding and dissolving them away with minimal effort. Furthermore, FerreX will dissolve and remove other surface contaminants such as tar and wax at the same time. Directions for wheels: Avoid using on hot surfaces. Wash […]
AutoClay Soft is best if the paint is in good condition, if you like to clay your vehicle frequently or indeed if the weather is cold. Why use a clay-bar? Assess the degree of embedded metallic and brake dust debris that has entered the surface of your paint film by gently rubbing the paint with […]
TRIX is a true and dedicated Ultimate Dual Action fallout and contamination remover! Trix has been manufactured with the same strength of ingredients as its predecessors Iron X & Tar X. Trix combines the power of both to work as a dual action fallout remover saving precious time and products! Features: Excellent wheel cleaner Strong […]
Optimum T.A.R.™ Remover is a fast acting, easy to use, and environmentally friendly solution for removing tar, adhesive, and rubber contaminants from all automotive surfaces. Optimum T.A.R.™ Remover is based on soy and other natural extracts and does not contain any petroleum distillates making it safe for the consumer, the environment, and your vehicles and is safe to use on […]
CarPro’s Iron X Snow Soap Gel has under gone some major changes! It is now known as CarPro Snow Soap and can be used in with multiple wash methods including as a snow foam or as it was previously used adding directly to your mitt. After a vehicle has been properly de-contaminated IXSS will keep […]
For removing surface dirt contamination such as tree sap, rust bloom, insect residue and tar stains from paintwork and glass. Directions for use: – Wash the vehicle. Spray the surfaces to be treated with cleaning/lubricant spray (e.g. SONAX Clear Glass) until a homogeneous liquid fi lm is formed – Wipe affected surfaces with the Clay […]
Immolube is a special mixture of surfactants and solvents made for reducing friction while sanding, polishing or claying painted automotive surfaces. Its slick, non-stick formula offers enough viscosity to reduce unwanted digging, and marring. Immolube has no protective polymers and no gloss enhancers in it and is easy to remove with a wash or wipe. […]
Immolube is a special mixture of surfactants and solvents made for reducing friction while sanding, polishing or claying painted automotive surfaces. Its slick, non-stick formula offers enough viscosity to reduce unwanted digging, and marring. Immolube has no protective polymers and no gloss enhancers in it and is easy to remove with a wash or wipe. […]
Mild, low-residue lubricant free of coating defcts. Effective for use with clay bars or pads. The excellent lubricity minimises surface scratching during cleaning. Unlike other lubricants it does not leave behind any film. Residue is easy to wipe away with a microfibre cloth. Due to the specialised formula the clay bars or pads do not […]