Optimum Ferrex 500ml
- Description
Description
OPTIMUM FERREX 500ML SPRAY BOTTLE
Our Optimum FerreX spray is designed to dissolve ferrous oxides from wheels and painted surfaces quickly, by bonding and dissolving them away with minimal effort. Furthermore, FerreX will dissolve and remove other surface contaminants such as tar and wax at the same time.
Directions for wheels:
Avoid using on hot surfaces. Wash wheels to remove excess contaminants. Spray Optimum Ferrex 500ml directly on wheels and allow 1 – 2 minutes to fully dissolve ferrous oxides. Agitate with a soft bristle brush as needed. Rinse off with plenty of water.
Directions for painted surfaces:
Wash with Optimum No Rinse™ Wash & Shine or Optimum Car Wash before applying Optimum Ferrex. Use on a cool surface and out of direct sunlight. Spray Optimum Ferrex directly on painted surface and allow 1 – 2 minutes to fully dissolve ferrous oxide. Agitate with a microfiber towel or soft sponge if necessary. Rinse off with plenty of water.
Related products
Gtechniq W8v2 Bug Remover 500ml – Removes bug splatter with ease – 100% biodegradable – pH neutral Why use Gtechniq W8 Bug Remover? Bug splatter is one of the hardest to remove contaminants. W8 Bug Remover is a 100% biodegradable, pH neutral formula. It makes light work of removing bug splatter without relying on aggressive caustic […]
Immolube is a special mixture of surfactants and solvents made for reducing friction while sanding, polishing or claying painted automotive surfaces. Its slick, non-stick formula offers enough viscosity to reduce unwanted digging, and marring. Immolube has no protective polymers and no gloss enhancers in it and is easy to remove with a wash or wipe. […]
Mild, low-residue lubricant free of coating defcts. Effective for use with clay bars or pads. The excellent lubricity minimises surface scratching during cleaning. Unlike other lubricants it does not leave behind any film. Residue is easy to wipe away with a microfibre cloth. Due to the specialised formula the clay bars or pads do not […]
Autoglym Intensive Tar Remover 325ml During warm weather the road surface can disintegrate and small specks of tar are flicked onto your car and can be difficult to remove with shampoo alone. These spots show up especially well on light coloured cars and can spoil the look of a clean car. Intensive Tar Remover can […]
Gtechniq W6 Iron and General Fallout Remover 500ml – Dissolves fallout and brake dust fast – Does not damage coatings – Effective on wheels and paintwork Why use Gtechniq Iron and General Fallout Remover? W6 Iron and General Fallout Remover is formulated to offer you the safest, most effective method of removing potentially damaging contamination […]
Your vehicle is under constant attack from airborne contaminants. Many of these are tiny particles of iron that appear as specks on paintwork and brake dust on wheels, dulling their shine. The active ingredients in Magma turn red as they react with these iron particles to safely loosen them from the surface to be easily […]
Optimum T.A.R.™ Remover is a fast acting, easy to use, and environmentally friendly solution for removing tar, adhesive, and rubber contaminants from all automotive surfaces. Optimum T.A.R.™ Remover is based on soy and other natural extracts and does not contain any petroleum distillates making it safe for the consumer, the environment, and your vehicles and is safe to use on […]
Regular – If the vehicle is heavily contaminated, has never been clay-barred before, or it’s hot summertime then use Regular. All clay bars become firmer when cold and softer when warm. Assess the degree of embedded metallic and brake dust debris that has entered the surface of your paint film by gently rubbing the paint […]