CarPro Tar X 1L
- Description
Description
Tar X is a super strength tar, adhesive, and bug remover as well as a degreaser that derives its power from 100% of the solvents extracted from orange peels. This makes it eco-friendly but don’t let that fool you when it comes to the power of this underrated product. Take a look at the product videos to see it in action.
Features:
This product contains no chlorinated solvents or harsh chemicals and is not corrosive. It has over 60% active ingredients.
Cuts through heavy grease and tar
Use for all purpose de-greasing tar and asphalt removal, insect , tire mark ,adhesives spot removal, traffic film and many other tough cleaning jobs.
Leaves surfaces clean in one step.
Slightly more viscosity than other tar removers so it will cling longer to the surface, cutting down on the volume of product used, & creating less run off.
Quickly penetrates and loosens tar, so it may be flushed off with water.
Can also be used as a heavy duty parts and equipment cleaner.
Built in color tracers, which aid in viewing where it has been applied and when it has been removed.
Great Citrus Smell
Fast Reaction Time
Easy to use
Heavy duty formula allows extended dwell times when needed
Based on renewable solvents and natural ingredients
Reduces the need for intensive claying when organic contaminants are the culprit
Corey’s Tips and Method of Application:
Tar X is a (citrus based) solvent so it’s recommended that you apply it to a dry surface where it won’t be diluted by water.
After shaking the bottle and spraying onto a dry surface I allow it to dwell for anywhere from 3 to 10 minutes depending on how thick the tar is and the situation of the environment.
Agitate the area with a damp wash mitt or sponge before rinsing it off.
Tar X should not be allowed to dry on surfaces or be applied in direct sunlight.
Do not leave on the surface for more than 7 to 10 minutes or allow to dry.
If using Tar X as a spot treatment and run into stubborn tar you can take a sponge and apply some Tar X to it before using it to agitate the tar.
Precautions and Warnings:
Avoid sensitive clear plastics like headlights and clear bras. Headlights can re lightly re-polished but clear bras should be avoided completely,
WARNING : Do NOT let dry on plastic or other sensitive materials of possible damage may occur.
Avoid working under direct sunshine or hot surface.
Avoid spraying on acrylic paint surfaces, or poor after market acrylic paint, it may affect that surface and cause a possible bleaching affect.
Work in a well ventilated area.
We strongly recommend the used of eye protection, safety gloves and a dedicated face mask while working with any professional car care product
Related products
Wowo’s FALLOUT REMOVER is exactly what you need to remove the embedded particles and iron deposits in your paintwork. This is a necessary step in your car’s maintenance routine. Loaded with Surfactants, FALLOUT REMOVER dissolves iron and other particles causing a reaction that makes your car look as though its bleeding purple. But don’t worry! […]
CarPro’s Iron X Snow Soap Gel has under gone some major changes! It is now known as CarPro Snow Soap and can be used in with multiple wash methods including as a snow foam or as it was previously used adding directly to your mitt. After a vehicle has been properly de-contaminated IXSS will keep […]
Roar Deep Wash Clay Mitt is a superior clay mitt for the removal of contaminants in your paint work, It is ideal for restoring your gloss level and giving you a smooth finish. Effective on paint, glass and chrome surfaces Can restore high gloss and smooth finish It can be rinsed and reused numerous times Effectively […]
The ULTRA Clay Towel helps maintain a clean & smooth surface! An evolution of the clay bar! – USE BEFORE WAXING, BUFFING, & POLISHING – TRULY CLEANS & SMOOTHS THE FINISH – INCREASES GLOSS, DEPTH, & SHINE – HELPS WAX & SEALANTS LAST LONGER DIRECTIONS FOR GENERAL USE: – 1. Wash vehicle to remove loose dirt and […]
A slightly more aggressive clay bar that will help you prepare your car paint before the application of any protective coatings, no matter whether sealant, or wax. It removes any dirt that might not be visible with a naked eye, like iron filings, rubber residue, bird and sap droppings. The body of the vehicle will […]
This powerful, pH-neutral cleaner is made with reactive agents and extra high performance detergents. Superficial rust, metal particles, burnt-in brake dust and other non-organic pollutants are swiftly and thoroughly cleaned away. Gentle for materials. Components are harmonised for a longer contact time / moisturisation, so that the reactive agents can dissolve tough stains and burnt-in […]
For removing surface dirt contamination such as tree sap, rust bloom, insect residue and tar stains from paintwork and glass. Directions for use: – Wash the vehicle. Spray the surfaces to be treated with cleaning/lubricant spray (e.g. SONAX Clear Glass) until a homogeneous liquid fi lm is formed – Wipe affected surfaces with the Clay […]
Iron Terminator cracks downs even the most stubborn ferrous contaminants, turning dark red when it begins to react. Well-balanced pH make it safe for all kinds of rims, including alloy, painted or multi-part rims, as well as painted surfaces of car body. Iron Terminator easily removes iron particles, brake dust and corrosive deposits to deep-clean the […]
Gtechniq W6 Iron and General Fallout Remover 500ml – Dissolves fallout and brake dust fast – Does not damage coatings – Effective on wheels and paintwork Why use Gtechniq Iron and General Fallout Remover? W6 Iron and General Fallout Remover is formulated to offer you the safest, most effective method of removing potentially damaging contamination […]